Flap Dimensions:
6"w x 11”h
The entry way your dog goes through.Height To Raise Window
18 1/2"
How high you must raise your window in order to fit the panel into the track.Free U.S. Shipping & Lifetime Warranty For All Endura Flap Pet Doors
Need help Installing? Take a look at our Thermo Sash Installation page.
6"w x 11”h
The entry way your dog goes through.18 1/2"
How high you must raise your window in order to fit the panel into the track.Flap Size | Flap Dimension | Height To Raise Window | Recommended Pet Height |
---|---|---|---|
Small | 6" w x 11" h | 18 1/2" | 9" - 15" |
Important Note: All Extra Large and 22"-25" adjustment range sales are final, no returns. Please simulate the opening (open the window, use duct tape to simulate the opening) to be sure this size is appropriate before ordering.
A
Pet Height: inches
B
Pet Width: inches
Please read instructions & notes thoroughly before installation.
For a permanent lock, install a wood screw in the track immediately above the window on both sides. You will no longer be able to raise the window. For a temporary lock, place a removable wooden dowel or Charley bar in either track above the window, shown in Detail 1.
Make sure you place steps or ramps leading to your pet’s door at a height that works! When they go through the flap, the top of the flap should be at least 1" (2,5 cm) higher than the top of their back. Watch your pet and adjust as needed to keep them comfortable.
Does the Thermo Sash have an adjustable height? No, the height of the small sash window unit is determined by the height of the pet door. |
Can I still into this dog door into my window if my window is not at ground level? Yes! You can install steps or a ramp on both sides of the window to ensure your dog has access. |
Is there a way to switch which side of the Thermo Sash the flap is on (from the left to the right)? Yes. Start by removing the screws on the bottom and top og the panel, then sliding the flap assembly out. Then you can simply flip the assembly upside down and slide it right back in. Put the screws back in and tightened them. Make sure the thumb screws and your locking cover are on the same side of the panel. |
Is the Thermo Sash available in sizes narrower than 22” wide? You can make the small sash window panel ¾” smaller by trimming the spring loaded piece on the right side. Otherwise, we may be able to make you a custom unit. Please contact customer service for more details. |
How high does my window have to be raised in order to install the Thermo Sash? It varies based on your pet door size and height:
|
What is the minimum width of the window track needed to accommodate the Thermo Sash 3e? Your window track must at least be 1” wide.Your window track must be at least 1 inch wide for thermo sash 3e pet door installation. Is this for sideways sliding windows?No, this insert is for sash windows, which slide up and down and not side to side. If you have a sideways sliding window, see the Endura Flap Cat Door for Horizontal Sliding Windows (which is also available for vinyl window frames). |
Which Thermo Sashes are considered custom and are not returnable? All Extra Large pet door sashes and any pet door size in a sash width with a 22"-25" adjustment range. Is this for sideways sliding windows?No, this insert is for sash windows, which slide up and down and not side to side. If you have a sideways sliding window, see the Endura Flap Cat Door for Horizontal Sliding Windows. |
What makes the Endura Flap better than other pet doors? There has been lots of discussion as to why the Endura Flap is such a‚ high-performing pet door, but for engineers or those looking for some more technical information here is a 74-page‚ dog door energy efficiency study‚ showing what makes it so special. |
Endura Flap products have a lifetime warranty against defects in materials and workmanship under standard regular use. Endura Flap® Pet Doors Are 100% Designed, Engineered, and Manufactured in the USA. They are handmade for quality work in San Luis Obispo, California.
We will replace any defective parts at no cost to you. Defective parts may include incorrectly sized flaps, bent or dented frames, or improperly fitted parts.
Customers living outside of the continental United States are responsible for shipping costs as well as duties and taxes (if applicable) for any replacement parts or services covered under the warranty policy regardless of the replacement part or service's original cost.
Important Note:
Endura Flap® pet doors have a lifetime warranty for normal wear & tear and manufacturing defects (dog-chewing is not covered).
Damage caused by not using the product as intended, improper installation, and chewing is not covered under this warranty.Endura Flap Pet Doors used in a commercial application like a Kennel or Boarding facility have a three year warranty.
6"w x 11”h
The entry way your dog goes through.18 1/2"
How high you must raise your window in order to fit the panel into the track.Flap Size | Flap Dimension | Height To Raise Window | Recommended Pet Height |
---|---|---|---|
Small | 6" w x 11" h | 18 1/2" | 9" - 15" |
Important Note: All Extra Large and 22"-25" adjustment range sales are final, no returns. Please simulate the opening (open the window, use duct tape to simulate the opening) to be sure this size is appropriate before ordering.
A
Pet Height: inches
B
Pet Width: inches
Please read instructions & notes thoroughly before installation.
For a permanent lock, install a wood screw in the track immediately above the window on both sides. You will no longer be able to raise the window. For a temporary lock, place a removable wooden dowel or Charley bar in either track above the window, shown in Detail 1.
Make sure you place steps or ramps leading to your pet’s door at a height that works! When they go through the flap, the top of the flap should be at least 1" (2,5 cm) higher than the top of their back. Watch your pet and adjust as needed to keep them comfortable.
Does the Thermo Sash have an adjustable height? No, the height of the small sash window unit is determined by the height of the pet door. |
Can I still into this dog door into my window if my window is not at ground level? Yes! You can install steps or a ramp on both sides of the window to ensure your dog has access. |
Is there a way to switch which side of the Thermo Sash the flap is on (from the left to the right)? Yes. Start by removing the screws on the bottom and top og the panel, then sliding the flap assembly out. Then you can simply flip the assembly upside down and slide it right back in. Put the screws back in and tightened them. Make sure the thumb screws and your locking cover are on the same side of the panel. |
Is the Thermo Sash available in sizes narrower than 22” wide? You can make the small sash window panel ¾” smaller by trimming the spring loaded piece on the right side. Otherwise, we may be able to make you a custom unit. Please contact customer service for more details. |
How high does my window have to be raised in order to install the Thermo Sash? It varies based on your pet door size and height:
|
What is the minimum width of the window track needed to accommodate the Thermo Sash 3e? Your window track must at least be 1” wide.Your window track must be at least 1 inch wide for thermo sash 3e pet door installation. Is this for sideways sliding windows?No, this insert is for sash windows, which slide up and down and not side to side. If you have a sideways sliding window, see the Endura Flap Cat Door for Horizontal Sliding Windows (which is also available for vinyl window frames). |
Which Thermo Sashes are considered custom and are not returnable? All Extra Large pet door sashes and any pet door size in a sash width with a 22"-25" adjustment range. Is this for sideways sliding windows?No, this insert is for sash windows, which slide up and down and not side to side. If you have a sideways sliding window, see the Endura Flap Cat Door for Horizontal Sliding Windows. |
What makes the Endura Flap better than other pet doors? There has been lots of discussion as to why the Endura Flap is such a‚ high-performing pet door, but for engineers or those looking for some more technical information here is a 74-page‚ dog door energy efficiency study‚ showing what makes it so special. |
Endura Flap products have a lifetime warranty against defects in materials and workmanship under standard regular use. Endura Flap® Pet Doors Are 100% Designed, Engineered, and Manufactured in the USA. They are handmade for quality work in San Luis Obispo, California.
We will replace any defective parts at no cost to you. Defective parts may include incorrectly sized flaps, bent or dented frames, or improperly fitted parts.
Customers living outside of the continental United States are responsible for shipping costs as well as duties and taxes (if applicable) for any replacement parts or services covered under the warranty policy regardless of the replacement part or service's original cost.
Important Note:
Endura Flap® pet doors have a lifetime warranty for normal wear & tear and manufacturing defects (dog-chewing is not covered).
Damage caused by not using the product as intended, improper installation, and chewing is not covered under this warranty.Endura Flap Pet Doors used in a commercial application like a Kennel or Boarding facility have a three year warranty.