Endura Flap Slidelock - Installation Instructions
Installation Instructions
![installation video image](https://cdn.shopify.com/s/files/1/0325/4524/3274/files/unnamed_12.png?v=1741301106")
Difficulty
Easy
Steps
05
Time Required
0.25 hours
Sections
01
Flags
02
Parts
- 1 Endura Flap Slidelock (includes unit and screws)
Tools
- Screwdriver
Please read instructions & notes thoroughly before installation.
Step 1 Find the Perfect Locking Spot
- Installation is flexible. Position the Slidelock anywhere on your sliding door where the lock plate can securely attach to the door frame. Find the arrangement that best suits your home!
Step 2 Prepping the Lock
- Loosen the two screws on the side of the lock and remove the sheet metal cap.
Step 3 Mount the Lock
- Place the lock where you want it and make sure it lines up with your chosen plate. Secure it with the six short screws.
Step 4 Install the Locking Plate
- Slide the door or window closed. Now, position your Lock Plate or Hole Plate where it belongs and secure it with the long screws.
- If you're using the Hole Plate, grab a drill and make a clearance hole so the lock can latch properly.
Step 5 The Moment of Truth
- Give the lock a quick test—does it engage and disengage smoothly? If yes, you’re golden! Put the metal cap back on and tighten those side screws.
- choosing a selection results in a full page refresh
- press the space key then arrow keys to make a selection