Endura Flap Designer Pro Series Pet Door for Walls
Endura Flap Designer Pro Series Pet Door for Walls
Regular price
$569.99
Sale price
$569.99
Sale
Unit price
/per
Adding product to your cart
Complete Installation Kit: Comes with all the supplies you'll need to install in any wall up to 16" deep
Flawless blending: Achieves a sophisticated, professional appearance by integrating smoothly with your wall and trim (trim not included)
Adaptable to multiple wall thicknesses: Accommodates walls from 2" - 16" with the help of extra materials.
Robust aluminum frame: Ensures long-lasting durability and comes in a range of flap sizes.
Internal frame is smaller and has no flange which allows it to mounts flush on the wall so you can customize the trim (not included) to match your home's aesthetics.
Double-flap system provides exceptional weather resistance: Flaps can endure 50 mph winds and stay flexible even at temperatures down to -40°F.
Complete pet door kit for installation in your wall, if you only need the frames with flaps and a locking cover, please order the Builder Series.
Seamless integration: Provides a sharp, professional finish by blending with your wall and trim.
Versatile wall compatibility: Suitable for walls 2" - 16" thick with additional materials.
Highly durable aluminum frame: Ensures long-lasting performance and durability.
Available in various flap sizes: Accommodates pets of all shapes and sizes.
Double flap design: Provides ultimate draft-protection to keep out drafts and reduce energy loss.
Weather-resistant flaps: Withstand 50 mph winds and temperatures as low as -40°F.
Flush design: Enhances your home's appearance with a clean, polished look.
Magnetic lining: Provides a secure seal to prevent drafts and wind intrusions.
90-day return policy: Offers peace of mind for your investment.
Lifetime warranty: Guarantees the product's durability and reliability.
Polyolefin polymer flap: Resists warping and cracking in extreme heat up to 110 degrees.
Flexible flap design: Swings on a rod at the top to avoid cracking and flexing.
Locking cover included: Front-loading locking cover blocks access when needed for added security while allowing pet door to be installed under window sills and other features. You can upgrade your door's security with the Watchdog Security Cover.
Energy-efficient: Keeps home insulated to lower your energy bill and accommodate pets of various sizes.
Size & Measurement Guidex
x
Size Chart
Small Double Flap: 6"w x 10"h
Medium Double Flap: 8"w x 14"h
Large Double Flap: 10"w x 18"h
Extra Large Double Flap: 12"w x 22"h
Flap Dimensions:
Double Flap:6"w x 10"h
The entry way your dog goes through.
Outer Frame Dimensions
Outside: 10 1/8"w x 16 3/4"h
Inside: 7 5/8"w x 14 7/8"h
The outer edge of the pet door.
Rough Cut Out:
9 1/4"w x 16 3/8"h
The size of the hole needed to fit your pet door into your wall.
Flap Dimensions:
Double Flap:8"w x 14"h
The entry way your dog goes through.
Outer Frame Dimensions
Outside: 12 3/16"w x 20 3/4"h
Inside: 9 5/8"w x 18 7/8"h
The outer edge of the pet door.
Rough Cut Out:
11 1/4"w x 20 3/8"h
The size of the hole needed to fit your pet door into your wall.
Flap Dimensions:
Double Flap:10"w x 18"h
The entry way your dog goes through.
Outer Frame Dimensions
Outside: 14 3/16"w x 24 3/4"h
Inside:11 11/16"w x 22 7/8"h
The outer edge of the pet door.
Rough Cut Out:
13 3/8"w x 24 3/8"h
The size of the hole needed to fit your pet door into your wall.
Flap Dimensions:
Double Flap:12"w x 22"h
The entry way your dog goes through.
Outer Frame Dimensions
Outside: 16 1/4"w x 28 7/8"h
Inside: 13 3/4"w x 26 7/8"h
The outer edge of the pet door.
Rough Cut Out:
15 3/8"w x 28 3/8"h
The size of the hole needed to fit your pet door into your wall.
Flap Size
Flap Dimension
Flap Style
Rough Cut Out
Outer Dimensions for Inside Frame
Outer Dimensions for Outside Frame
Recommended Pet Height
Small
6" w x 10" h
Double
9 1/4" w x 16 3/8" h
7 5/8"w x 14 7/8"h
10 1/8"w x 16 3/4"h
8" - 14"
Medium
8" w x 14" h
Double
11 1/4" w x 20 3/8" h
9 5/8"w x 18 7/8"h
12 3/16"w x 20 3/4"h
8" - 21"
Large
10" w x 18" h
Double
13 3/8" w x 24 3/8"
11 11/16"w x 22 7/8"h
14 3/16"w x 24 3/4"h
8" - 27"
Extra Large
12" w x 22" h
Double
15 3/8" w x 28 3/8" h
13 ¾"w x 26 7/8"h
16 1/4"w x 28 7/8"h
8" - 34"
Single flap or double flap? This is the double flap version. The double flap will provide more insulation for your home, perfect for extreme climates. With a double-flap system, there is a flap on each side of the tunnel and dead air space in between to add extra insulation.
Note: Endura Flap pet doors are not recommended for use by kittens or very small dogs. Cats have been successful using Small; however, a few have found the Medium difficult to use. We would not recommend using the Large or Extra Large or any of the double flap versions for cats.
Saw for Cutting Outer Wall (compatible with your wall material)
Razorblade (for trimming tape)
Philips Screwdriver
Straight edge
Level
Read instructions & notes thoroughly before installation. We recommend a licensed, bonded and insured contractor do this work.
Step 1Measure Your Pet
Measure your pet and make a mark at least 3” above your pet’s height on your wall, this will line up with the top of the cutout.
Depending on pet height and the height of your baseboards you may need to cut into the baseboards to install the frame. If you want to avoid that, make sure to set the height accordingly.
Step 2Prepare Wall for Installation
Find a location clear of plumbing, electrical and other obstructions. If you have stud construction choose a spot against one stud when possible.
Use the rough cut out dimensions from the chart to mark out the rough opening in the wall. Make sure your lines are level. This cut out will leave space for the included tunnel material.
Step 3Make the Rough Cutout
Cut through your wall with the appropriate tools.
In some cases, you may have to cut and brace a stud. See local building codes to ensure this is done properly. We recommend hiring a professional if you are unsure what to do.
Remove insulation inside the wall as needed. You can save some to put back into open areas of the wall cavity.
Step 4Add a Bottom Support Stud
The step won't be necessary for most cinder block walls.
Add a bottom support stud between the studs in your wall.
Add any other supports or bracing as needed.
Step 5Create A Tunnel Liner Box
Create a tunnel liner box using 1/2" plywood.
The depth should be 1/8" less than the thickness of the wall.
Step 6Attach the Tunnel Liner Box
Insert the tunnel liner box into the rough cutout opening. Use shims to get the tunnel level and square.
Use wood screws and/or concrete screws to attach the tunnel box to a nearby stud, brick, concrete, or bottom support.
Trim off shims flush to the wall. You can score with a knife then snap them off.
Step 9Apply Spray Foam Sealant
Use spray foam sealant to fill any gaps around the tunnel box.
Once the sealant dries, trim off any excess.
Step 8Seal the Tunnel
Use an outdoor rated paint to seal any exposed wood in the tunnel.
Step 9Screw in the Frames
Make sure the four tabs are upright and snug to the inside frame. You may have to loosen the screw to rotate it into place using a Phillips screwdriver.
Insert the inside frame and level it. While holding the frame flush against the wall, use four wood screws to screw the mounting tabs to the inside of the tunnel.
If there are larger gaps you can pre-bend the mounting tab toward the tunnel.
Step 11Install the Outside Frame
Repeat installation step #10 for the outside frame, making sure the flap(s) swing through both frames without interference.
Step 11Seal the Inside Frame
From the outside, apply silicone in the tunnel, around the sides and bottom edges of the inside frame. This will seal the tunnel to prevent water intrusion.
Step 12Seal the Outside Frame
Use a sharp razor blade to trim off any excess tunnel tape that is sticking out past the outside frame on all four sides.
Apply silicone where the outside frame meets the exterior wall on the top and sides, but leave the bottom open to allow for drainage.
Step 13Add Home Trim
Add trim to the interior frame to suit your home design.
Use caulking and paint as desired
FAQ
Can a large dog and a cat use the same double flap Endura Flap Dog Doors for Walls?
We recommend cats use the small flap size since the larger flaps might be difficult for them to push through. However, if you have cats and dogs sharing a Endura Flap wall mount pet door, you can decrease the magnetic resistance of the threshold on large and extra-large sizes making it easier for a cat to use. For small or medium pet doors you can offset the magnets slightly which can also decrease the magnetic strength.
How do I know what flap size will fit my dog?
When installing the Endura Flap wall mount doggie door you want it to clear the top of your dog's back by at least 1". You also want the step over to be comfortable, no more than 1/3 your pet's shoulder height. Lastly, you want the width to allow your pet to go through without touching the sides, so about 1" wider than them.
Is the flap flexible? Seems like it would trap a dog if it backed up.
The Endura Flap is slightly more rigid than other economy-style flaps, but it is a safe, soft, flexible flap.
Is the flap loud when the dog goes in or out?
When the flap gets to its resting place there is a snapping sound when the magnets employ. This sound lets you know the door is doing its job sealing out the elements and keeping your heated or cooled air inside.
What side does the locking cover slide in?
All locking covers slide in from the top. If you purchase a double flap model, the locking cover can be used on the inside or outside the frame. If you purchase a single flap, the locking cover is on the interior frame (the side closest to the inside of your home).
Are in wall pet door replacement flaps available?
Yes, we carry Endura Pet Door Replacement Flaps. They will work for all Endura Flap Pet Door models (wall mount, doggy door mount, kennel doors, window sashes, and sliding glass door patio pet doors).
I have a dog that I want to let out, but I want to prevent our cats from using it. Can the flap on the Endura wall mount pet door be weighted to keep them from using it?
You can increase the magnetic strength of the in wall dog door by purchasing additional magnets here. Some people have found success doing this and keeping their cats inside.
What material is the Endura Dog Door for Walls’ tunnel made from?
What is the difference between this door and the Endura Flap Builder Series?
The Endura Flap Builder Series has the same frame, but does not come with any additional supplies needed to install your pet door.
Warranty
Endura Flap products have a lifetime warranty against defects in materials and workmanship under standard regular use. Damage caused by not using the product as intended, improper installation, and chewing is not covered under this warranty.
Customer Reviews
Customer Reviews
5.0Based on 1 Reviews
5 ★
100%
1
4 ★
0%
0
3 ★
0%
0
2 ★
0%
0
1 ★
0%
0
Customer Photos
Write a ReviewAsk a Question
Reviews
Questions
Thank you for submitting a review!
Your input is very much appreciated. Share it with your friends so they can enjoy it too!
This pet door for wall installation uses the superior Endura Flap Pet Doors' frames, flaps and tunnel known for their quality and energy-efficiency. Your purchase allows you to customize the pet door installation to match the home's aesthetics. After installing the inner and outer frames and tunnel for walls up to 15.75" thick (trim down to wall thickness), you can add molding on the inside and outside to match the personalized look of the home. It's an installation sure to delight the homeowner.
The size of the hole needed to fit your pet door into your wall.
Flap Dimensions:
Double Flap:8"w x 14"h
The entry way your dog goes through.
Outer Frame Dimensions
Outside: 12 3/16"w x 20 3/4"h
Inside: 9 5/8"w x 18 7/8"h
The outer edge of the pet door.
Rough Cut Out:
11 1/4"w x 20 3/8"h
The size of the hole needed to fit your pet door into your wall.
Flap Dimensions:
Double Flap:10"w x 18"h
The entry way your dog goes through.
Outer Frame Dimensions
Outside: 14 3/16"w x 24 3/4"h
Inside:11 11/16"w x 22 7/8"h
The outer edge of the pet door.
Rough Cut Out:
13 3/8"w x 24 3/8"h
The size of the hole needed to fit your pet door into your wall.
Flap Dimensions:
Double Flap:12"w x 22"h
The entry way your dog goes through.
Outer Frame Dimensions
Outside: 16 1/4"w x 28 7/8"h
Inside: 13 3/4"w x 26 7/8"h
The outer edge of the pet door.
Rough Cut Out:
15 3/8"w x 28 3/8"h
The size of the hole needed to fit your pet door into your wall.
Flap Size
Flap Dimension
Flap Style
Rough Cut Out
Outer Dimensions for Inside Frame
Outer Dimensions for Outside Frame
Recommended Pet Height
Small
6" w x 10" h
Double
9 1/4" w x 16 3/8" h
7 5/8"w x 14 7/8"h
10 1/8"w x 16 3/4"h
8" - 14"
Medium
8" w x 14" h
Double
11 1/4" w x 20 3/8" h
9 5/8"w x 18 7/8"h
12 3/16"w x 20 3/4"h
8" - 21"
Large
10" w x 18" h
Double
13 3/8" w x 24 3/8"
11 11/16"w x 22 7/8"h
14 3/16"w x 24 3/4"h
8" - 27"
Extra Large
12" w x 22" h
Double
15 3/8" w x 28 3/8" h
13 ¾"w x 26 7/8"h
16 1/4"w x 28 7/8"h
8" - 34"
Single flap or double flap? This is the double flap version. The double flap will provide more insulation for your home, perfect for extreme climates. With a double-flap system, there is a flap on each side of the tunnel and dead air space in between to add extra insulation.
Note: Endura Flap pet doors are not recommended for use by kittens or very small dogs. Cats have been successful using Small; however, a few have found the Medium difficult to use. We would not recommend using the Large or Extra Large or any of the double flap versions for cats.
Saw for Cutting Outer Wall (compatible with your wall material)
Razorblade (for trimming tape)
Philips Screwdriver
Straight edge
Level
Read instructions & notes thoroughly before installation. We recommend a licensed, bonded and insured contractor do this work.
Step 1Measure Your Pet
Measure your pet and make a mark at least 3” above your pet’s height on your wall, this will line up with the top of the cutout.
Depending on pet height and the height of your baseboards you may need to cut into the baseboards to install the frame. If you want to avoid that, make sure to set the height accordingly.
Step 2Prepare Wall for Installation
Find a location clear of plumbing, electrical and other obstructions. If you have stud construction choose a spot against one stud when possible.
Use the rough cut out dimensions from the chart to mark out the rough opening in the wall. Make sure your lines are level. This cut out will leave space for the included tunnel material.
Step 3Make the Rough Cutout
Cut through your wall with the appropriate tools.
In some cases, you may have to cut and brace a stud. See local building codes to ensure this is done properly. We recommend hiring a professional if you are unsure what to do.
Remove insulation inside the wall as needed. You can save some to put back into open areas of the wall cavity.
Step 4Add a Bottom Support Stud
The step won't be necessary for most cinder block walls.
Add a bottom support stud between the studs in your wall.
Add any other supports or bracing as needed.
Step 5Create A Tunnel Liner Box
Create a tunnel liner box using 1/2" plywood.
The depth should be 1/8" less than the thickness of the wall.
Step 6Attach the Tunnel Liner Box
Insert the tunnel liner box into the rough cutout opening. Use shims to get the tunnel level and square.
Use wood screws and/or concrete screws to attach the tunnel box to a nearby stud, brick, concrete, or bottom support.
Trim off shims flush to the wall. You can score with a knife then snap them off.
Step 9Apply Spray Foam Sealant
Use spray foam sealant to fill any gaps around the tunnel box.
Once the sealant dries, trim off any excess.
Step 8Seal the Tunnel
Use an outdoor rated paint to seal any exposed wood in the tunnel.
Step 9Screw in the Frames
Make sure the four tabs are upright and snug to the inside frame. You may have to loosen the screw to rotate it into place using a Phillips screwdriver.
Insert the inside frame and level it. While holding the frame flush against the wall, use four wood screws to screw the mounting tabs to the inside of the tunnel.
If there are larger gaps you can pre-bend the mounting tab toward the tunnel.
Step 11Install the Outside Frame
Repeat installation step #10 for the outside frame, making sure the flap(s) swing through both frames without interference.
Step 11Seal the Inside Frame
From the outside, apply silicone in the tunnel, around the sides and bottom edges of the inside frame. This will seal the tunnel to prevent water intrusion.
Step 12Seal the Outside Frame
Use a sharp razor blade to trim off any excess tunnel tape that is sticking out past the outside frame on all four sides.
Apply silicone where the outside frame meets the exterior wall on the top and sides, but leave the bottom open to allow for drainage.
Step 13Add Home Trim
Add trim to the interior frame to suit your home design.
Use caulking and paint as desired
FAQ
Can a large dog and a cat use the same double flap Endura Flap Dog Doors for Walls?
We recommend cats use the small flap size since the larger flaps might be difficult for them to push through. However, if you have cats and dogs sharing a Endura Flap wall mount pet door, you can decrease the magnetic resistance of the threshold on large and extra-large sizes making it easier for a cat to use. For small or medium pet doors you can offset the magnets slightly which can also decrease the magnetic strength.
How do I know what flap size will fit my dog?
When installing the Endura Flap wall mount doggie door you want it to clear the top of your dog's back by at least 1". You also want the step over to be comfortable, no more than 1/3 your pet's shoulder height. Lastly, you want the width to allow your pet to go through without touching the sides, so about 1" wider than them.
Is the flap flexible? Seems like it would trap a dog if it backed up.
The Endura Flap is slightly more rigid than other economy-style flaps, but it is a safe, soft, flexible flap.
Is the flap loud when the dog goes in or out?
When the flap gets to its resting place there is a snapping sound when the magnets employ. This sound lets you know the door is doing its job sealing out the elements and keeping your heated or cooled air inside.
What side does the locking cover slide in?
All locking covers slide in from the top. If you purchase a double flap model, the locking cover can be used on the inside or outside the frame. If you purchase a single flap, the locking cover is on the interior frame (the side closest to the inside of your home).
Are in wall pet door replacement flaps available?
Yes, we carry Endura Pet Door Replacement Flaps. They will work for all Endura Flap Pet Door models (wall mount, doggy door mount, kennel doors, window sashes, and sliding glass door patio pet doors).
I have a dog that I want to let out, but I want to prevent our cats from using it. Can the flap on the Endura wall mount pet door be weighted to keep them from using it?
You can increase the magnetic strength of the in wall dog door by purchasing additional magnets here. Some people have found success doing this and keeping their cats inside.
What material is the Endura Dog Door for Walls’ tunnel made from?
What is the difference between this door and the Endura Flap Builder Series?
The Endura Flap Builder Series has the same frame, but does not come with any additional supplies needed to install your pet door.
Warranty
Endura Flap products have a lifetime warranty against defects in materials and workmanship under standard regular use. Damage caused by not using the product as intended, improper installation, and chewing is not covered under this warranty.
Customer Reviews
Customer Reviews
5.0Based on 1 Reviews
5 ★
100%
1
4 ★
0%
0
3 ★
0%
0
2 ★
0%
0
1 ★
0%
0
Customer Photos
Write a ReviewAsk a Question
Reviews
Questions
Thank you for submitting a review!
Your input is very much appreciated. Share it with your friends so they can enjoy it too!
This pet door for wall installation uses the superior Endura Flap Pet Doors' frames, flaps and tunnel known for their quality and energy-efficiency. Your purchase allows you to customize the pet door installation to match the home's aesthetics. After installing the inner and outer frames and tunnel for walls up to 15.75" thick (trim down to wall thickness), you can add molding on the inside and outside to match the personalized look of the home. It's an installation sure to delight the homeowner.